NERO 7 复制DVD-R出错，错误提示是:无法进行光盘一次刻录的起始动作

小叻

谢谢管理员门的辛苦劳动,
   我也是因为刻录出现了问题,才转到这边来的.学习了好多东西,现在遇到了新的问题.

   问题是这样的:
   我手头上有 DVD-R 16X  的碟子,里面原本是刻录了东西的,可以直接在我家的DVD机里面播放的.
  现在我想复制这个碟子,于是我买了 DVD-R 8X 的碟子回来了,
用 Nero 7 点里面的复制DVD,,不管用的是12x..8x..6x,,都复制不进去,
   错误提示是:无法进行光盘一次刻录的起始动作
    然后就是刻录失败.我把报告保存了,麻烦你们看看:
微软用户
微软中国
1C81-5099-1852-MA4X-4001-295E-****

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.10.1.0
Internal Version: 7, 10, 1, 0
(Nero Express)
Recorder:             <SONY DVD RW AW-G170A>    Version: 1.62 - HA 1 TA 3 - 7.10.1.0
Adapter driver:      <IDE>                     HA 1
Drive buffer  :      2048kB
Bus Type      :      default (0) -> ATAPI, detected: ?
CD-ROM:               <SONY     DVD-ROM DDU1675A>Version: 1S01 - HA 1 TA 0 - 7.10.1.0
Adapter driver:      <IDE>                     HA 1

=== Scsi-Device-Map ===
CdRomPeripheral      : SONY DVD-ROM DDU1675A            atapi Port 0 ID 0  DMA: On
CdRomPeripheral      : SONY DVD RW AW-G170A             atapi Port 0 ID 1  DMA: On
DiskPeripheral       : Hitachi HDS721616PLA380          atapi Port 1 ID 0  DMA: On

=== CDRom-Device-Map ===
SONY DVD-ROM DDU1675A      G:   CdRom0
SONY DVD RW AW-G170A       H:   CdRom3
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE           : 0
Physical memory     : 2047MB (2097151kB)
Free physical memory: 2047MB (2097151kB)
Memory in use       : 23 %
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

26.2.2010
DVD直接刻录
16:59:40        #1 Text 0 File SCSIPTICommands.cpp, Line 424
        LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
       
16:59:43        #2 Text 0 File SCSIPTICommands.cpp, Line 424
        LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
       
16:59:43        #3 Text 0 File SCSIPTICommands.cpp, Line 215
        SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
       
16:59:43        #4 Text 0 File DVDCopy.cpp, Line 320
        DVD Track-Information from source disc:
         Media Type: DVD-R
          S01 T01 Con 0x14 Start        0 Len   796352 NWA       -1 (gap     0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
       
16:59:43        #5 Text 0 File DVDCopy.cpp, Line 435
        Max -1 tracks of 1 allowed to copy
         1:        0 -   796352 =   796352, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
       
16:59:43        #6 Text 0 File Burncd.cpp, Line 3508
        Turn on Disc-At-Once, using DVD media
       
16:59:44        #7 Text 0 File DlgWaitCD.cpp, Line 307
        Last possible write address on media:  2298495 (510:46.45, 4489MB)
        Last address to be written:             796351 (176:58.01, 1555MB)
       
16:59:44        #8 Text 0 File DlgWaitCD.cpp, Line 319
        Write in overburning mode: NO (enabled: CD)
       
16:59:44        #9 Text 0 File DlgWaitCD.cpp, Line 2972
        Recorder: SONY DVD RW AW-G170A, Media type: DVD-R
         Disc Manufacturer: TYG02 -
         Disc Application Code: 64, Disc Physical Code: 193
       
16:59:44        #10 Text 0 File DlgWaitCD.cpp, Line 493
        >>> Protocol of DlgWaitCD activities: <<<
        =========================================
       
16:59:44        #11 Text 0 File ThreadedTransferInterface.cpp, Line 793
        Setup items (after recorder preparation)
         0: TRM_DATA_MODE1 (1 - 数据(模式1))
            2 indices, index0 (150) not provided
            original disc pos #0 + 796352 (796352) = #796352/176:58.2
            not relocatable, disc pos for caching/writing not required/not required
            -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 796352 blocks [H: SONY DVD RW AW-G170A]
        --------------------------------------------------------------
       
16:59:44        #12 Text 0 File ThreadedTransferInterface.cpp, Line 995
        Prepare [H: SONY DVD RW AW-G170A] for write in CUE-sheet-DAO
        DAO infos:
        ==========
         MCN: ""
         TOCType: 0x40; Session Closed, disc fixated
         Tracks 1 to 1:                                  Idx 0         Idx 1      Next Trk
           1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    1630928896, ISRC ""
        DAO layout:
        ===========
         ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
                0 |  lead-in |   0 |    0x41 |        0 |        0 | 0x00
                0 |        1 |   0 |    0x41 |        0 |        0 | 0x00
                0 |        1 |   1 |    0x41 |   796352 |   796352 | 0x00
           796352 | lead-out |   1 |    0x41 |        0 |        0 | 0x00
       
16:59:44        #13 Text 0 File SCSIPTICommands.cpp, Line 215
        SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
       
16:59:44        #14 Text 0 File Burncd.cpp, Line 4294
        Caching options: cache CDRom or Network-No, small files-No (<64KB)
       
16:59:44        #15 Phase 36 File dlgbrnst.cpp, Line 1762
        Burn process started at 8x (11,080 KB/s)
       
16:59:44        #16 Text 0 File ThreadedTransferInterface.cpp, Line 2721
        Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
       
16:59:44        #17 Text 0 File DVDR.cpp, Line 3225
        Recording mode: Sequential Recording Mode
       
16:59:44        #18 Text 0 File DVDR.cpp, Line 3381
        Start write address at LBA 0
        DVD high compatibility mode: Yes
       
16:59:44        #19 Text 0 File Cdrdrv.cpp, Line 9872
        ---- Disc Structure: Physical Format Information (00h) ----
        Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
         Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
         Disc Size: 120 mm,      Maximum Rate: <not specified> (F h)
         Number of Layers: 1,    Track Path: Parallel Track Path (PTP),  Layer Type: recordable
         Linear Density:         0,267 um/bit,  Track Density:  0,74 um/track
         Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
         End Sector Number in Layer 0:                 0 h (LBN: FFFD0000 h, 4193920 MB)
         Data in Burst Cutting Area (BCA) does not exist
          Revision number of maximum recording speed: -
          Revision number of minimum recording speed: -
          Revision number table of recording speed: - - - - - - -
          Class: 0
          Start sector number of the current Border-Out: 2FE10 h
          Start sector number of the next Border-In:     2FFA0 h
         Media Specific [16..63]:
            00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
            00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00    ................
            00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
       
16:59:44        #20 SPTI -1023 File SCSIPassThrough.cpp, Line 179
        CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1023)
        Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)
        Sense Code: 0x2C
        Sense Qual: 0x00
        CDB Data:   0x53 00 00 00 00 00 0C 26 C0 00 00 00
        Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 2C
       
16:59:44        #21 CDR -1023 File ThreadedTransferInterface.cpp, Line 1752
        Command sequence error
        H: SONY DVD RW AW-G170A
       
16:59:44        #22 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1752
        Could not perform start of Disc-at-once
       
16:59:44        #23 Text 0 File ThreadedTransfer.cpp, Line 269
        Pipe memory size 83836800
       
16:59:44        #24 Phase 38 File dlgbrnst.cpp, Line 1762
        Burn process failed at 8x (11,080 KB/s)
       
16:59:44        #25 Text 0 File SCSIPTICommands.cpp, Line 261
        SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
       
16:59:44        #26 Text 0 File SCSIPTICommands.cpp, Line 424
        UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
       
16:59:44        #27 Text 0 File Cdrdrv.cpp, Line 11185
        DriveLocker: UnLockVolume completed
       
16:59:44        #28 Text 0 File SCSIPTICommands.cpp, Line 261
        SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
       
16:59:44        #29 SPTI -1023 File SCSIPassThrough.cpp, Line 179
        CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1023)
        Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)
        Sense Code: 0x2C
        Sense Qual: 0x00
        CDB Data:   0x1B 00 00 00 02 00 00 00 00 00 00 00
        Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 2C
       
16:59:44        #30 SPTI -1023 File SCSIPassThrough.cpp, Line 179
        CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1023)
        Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)
        Sense Code: 0x2C
        Sense Qual: 0x00
        CDB Data:   0x1B 00 00 00 02 00 00 00 00 00 00 00
        Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 2C
       
16:59:44        #31 Text 0 File Cdrdrv.cpp, Line 11185
        DriveLocker: UnLockVolume completed
       
16:59:44        #32 Text 0 File SCSIPTICommands.cpp, Line 424
        UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
       

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)



然后我转到这个地方,用了个论坛这边有推荐的新的软件试试,,CDBurnerXP..
      也是用它复制DVD,,复制到中途,也是失败了.


          我想问问楼主能不能帮忙解决问题..

我现在就是想把我的DVD复制一下,然后又可以在我家的DVD顺利播放出来,用什么软件,还是我操作什么缺陷?
我父母不懂用电脑,我很需要这个..

小叻

最新的动态
  
        我买了新的DVD碟子来也没用,情况还是一样.

IsaacZ

先尝试先制作光盘制作镜像再刻录（用NERO制作成NRG格式镜像或用UltraISO制作成ISO格式）。

可尝试其他软件复制：CloneCD、Alcohol 120、UltraISO。

另参固顶帖011号作相关测试。

小叻

谢谢,
   我试了一下CloneCD.,还是不能复制,这次错误提示没有了..

        我再试试
      "先尝试先制作光盘制作镜像再刻录（用NERO制作成NRG格式镜像或用UltraISO制作成ISO格式）。"

IsaacZ

用UltraISO将VOB格式的DVD档案（VIDEO_TS文件夹）还原为DVD镜像或直接刻录图文教程

swswgaoyu

lz刻录失败原因有很多种，你的最大的可能是dma没有开启或没有安装南桥驱动，如果你是I系主板并开启了AHCI安装南桥驱动一般都能解决，
下载地址：
http://drivers.mydrivers.com/dri ... R-ICH10R-Rapid-Sto/

小叻

我到学校之后,
  换了同学的 电脑刻录,
就是把光驱装在他这边,
   然后就可以顺利刻录..
我也不知道是为什么了..
  可能是我自己的电脑哪里设置不行?

IsaacZ

上电脑厂商官网下载并更新所有硬件驱动。