NERO 7 复制DVD-R出错，错误提示是:无法进行光盘一次刻录的起始动作
谢谢管理员门的辛苦劳动,我也是因为刻录出现了问题,才转到这边来的.学习了好多东西,现在遇到了新的问题.
问题是这样的:
我手头上有 DVD-R 16X的碟子,里面原本是刻录了东西的,可以直接在我家的DVD机里面播放的.
现在我想复制这个碟子,于是我买了 DVD-R 8X 的碟子回来了,
用 Nero 7 点里面的复制DVD,,不管用的是12x..8x..6x,,都复制不进去,
错误提示是:无法进行光盘一次刻录的起始动作
然后就是刻录失败.我把报告保存了,麻烦你们看看:
微软用户
微软中国
1C81-5099-1852-MA4X-4001-295E-****
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 7.10.1.0
Internal Version: 7, 10, 1, 0
(Nero Express)
Recorder: <SONY DVD RW AW-G170A> Version: 1.62 - HA 1 TA 3 - 7.10.1.0
Adapter driver: <IDE> HA 1
Drive buffer: 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SONY DVD-ROM DDU1675A>Version: 1S01 - HA 1 TA 0 - 7.10.1.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : SONY DVD-ROM DDU1675A atapi Port 0 ID 0DMA: On
CdRomPeripheral : SONY DVD RW AW-G170A atapi Port 0 ID 1DMA: On
DiskPeripheral : Hitachi HDS721616PLA380 atapi Port 1 ID 0DMA: On
=== CDRom-Device-Map ===
SONY DVD-ROM DDU1675A G: CdRom0
SONY DVD RW AW-G170A H: CdRom3
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 2047MB (2097151kB)
Memory in use : 23 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
26.2.2010
DVD直接刻录
16:59:40 #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
16:59:43 #2 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
16:59:43 #3 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
16:59:43 #4 Text 0 File DVDCopy.cpp, Line 320
DVD Track-Information from source disc:
Media Type: DVD-R
S01 T01 Con 0x14 Start 0 Len 796352 NWA -1 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
16:59:43 #5 Text 0 File DVDCopy.cpp, Line 435
Max -1 tracks of 1 allowed to copy
1: 0 - 796352 = 796352, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
16:59:43 #6 Text 0 File Burncd.cpp, Line 3508
Turn on Disc-At-Once, using DVD media
16:59:44 #7 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media:2298495 (510:46.45, 4489MB)
Last address to be written: 796351 (176:58.01, 1555MB)
16:59:44 #8 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)
16:59:44 #9 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: SONY DVD RW AW-G170A, Media type: DVD-R
Disc Manufacturer: TYG02 -
Disc Application Code: 64, Disc Physical Code: 193
16:59:44 #10 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
16:59:44 #11 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - 数据(模式1))
2 indices, index0 (150) not provided
original disc pos #0 + 796352 (796352) = #796352/176:58.2
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 796352 blocks
--------------------------------------------------------------
16:59:44 #12 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1630928896, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 |lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 796352 | 796352 | 0x00
796352 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
16:59:44 #13 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
16:59:44 #14 Text 0 File Burncd.cpp, Line 4294
Caching options: cache CDRom or Network-No, small files-No (<64KB)
16:59:44 #15 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 8x (11,080 KB/s)
16:59:44 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
16:59:44 #17 Text 0 File DVDR.cpp, Line 3225
Recording mode: Sequential Recording Mode
16:59:44 #18 Text 0 File DVDR.cpp, Line 3381
Start write address at LBA 0
DVD high compatibility mode: Yes
16:59:44 #19 Text 0 File Cdrdrv.cpp, Line 9872
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP),Layer Type: recordable
Linear Density: 0,267 um/bit,Track Density:0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: -
Revision number of minimum recording speed: -
Revision number table of recording speed: - - - - - - -
Class: 0
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific :
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
16:59:44 #20 SPTI -1023 File SCSIPassThrough.cpp, Line 179
CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1023)
Sense Key:0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x53 00 00 00 00 00 0C 26 C0 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 2C
16:59:44 #21 CDR -1023 File ThreadedTransferInterface.cpp, Line 1752
Command sequence error
H: SONY DVD RW AW-G170A
16:59:44 #22 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1752
Could not perform start of Disc-at-once
16:59:44 #23 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800
16:59:44 #24 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 8x (11,080 KB/s)
16:59:44 #25 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
16:59:44 #26 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
16:59:44 #27 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed
16:59:44 #28 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
16:59:44 #29 SPTI -1023 File SCSIPassThrough.cpp, Line 179
CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1023)
Sense Key:0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x1B 00 00 00 02 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 2C
16:59:44 #30 SPTI -1023 File SCSIPassThrough.cpp, Line 179
CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1023)
Sense Key:0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x1B 00 00 00 02 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 2C
16:59:44 #31 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed
16:59:44 #32 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
然后我转到这个地方,用了个论坛这边有推荐的新的软件试试,,CDBurnerXP..
也是用它复制DVD,,复制到中途,也是失败了.
我想问问楼主能不能帮忙解决问题..
我现在就是想把我的DVD复制一下,然后又可以在我家的DVD顺利播放出来,用什么软件,还是我操作什么缺陷?
我父母不懂用电脑,我很需要这个.. 最新的动态
我买了新的DVD碟子来也没用,情况还是一样. 先尝试先制作光盘制作镜像再刻录（用NERO制作成NRG格式镜像或用UltraISO制作成ISO格式）。
可尝试其他软件复制：CloneCD、Alcohol 120、UltraISO。
另参固顶帖011号作相关测试。 谢谢,
我试了一下CloneCD.,还是不能复制,这次错误提示没有了..
我再试试
"先尝试先制作光盘制作镜像再刻录（用NERO制作成NRG格式镜像或用UltraISO制作成ISO格式）。" 用UltraISO将VOB格式的DVD档案（VIDEO_TS文件夹）还原为DVD镜像或直接刻录图文教程 lz刻录失败原因有很多种，你的最大的可能是dma没有开启或没有安装南桥驱动，如果你是I系主板并开启了AHCI安装南桥驱动一般都能解决，
下载地址：
http://drivers.mydrivers.com/drivers/342-136860-Intel-ICH7R-ICH8R-ICH9R-ICH10R-Rapid-Sto/ 我到学校之后,
换了同学的 电脑刻录,
就是把光驱装在他这边,
然后就可以顺利刻录..
:dizzy:我也不知道是为什么了..
可能是我自己的电脑哪里设置不行? 上电脑厂商官网下载并更新所有硬件驱动。
页:
[1]