IMGBURN刻X360盘出错：Logical Unit Communication CRC Error(ULTRA-DMA/32)
本帖最后由 大佬恒 于 2009-7-23 15:55 编辑一点刻录就出现这些东西，然后有取消 重试 继续选择，听说要设置断层点1913760
于是我在工具-选项-刻录-LO那里设置了这个数值，但还是失败
我已经到其他网站发过了，但是还是没有人帮我解决，所以才来这里打扰
Failed to set LO Date Zone Capacity!
Reason:Logical Unit Communication CRC Error(ULTRA-DMA/32)
完全根据教程做的~一按刻录就这样，以下还有关于盘的一些信息，等待高手解答
PIONEER DVD-RWDVR-118L 1.00 (ATA)
Current Profile: DVD+R DL
Disc Information:
Status: Empty
Erasable: No
Free Sectors: 4,173,824
Free Space: 8,547,991,552 bytes
Free Time: 927:32:74 (MM:SS:FF)
Supported Write Speeds: 4x, 6x, 8x
DVD±R DL Boundary Information:
L0 Data Zone Capacity: 2,086,912
Changeable: Yes
Physical Format Information (ADIP):
Disc ID: RICOHJPN-D01-67
Book Type: DVD+R DL
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,607
Last Physical Sector in Layer 0: 2,283,519
Physical Format Information (Last Recorded):
Disc ID: RICOHJPN-D01-67
Book Type: DVD+R DL
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,607
Last Physical Sector in Layer 0: 2,283,519 本帖最后由 IsaacZ 于 2009-7-22 23:13 编辑
官网已经有答案了：
Logical Unit Communication CRC Error (ULTRA-DMA/32) - ImgBurn Support Forum
http://forum.imgburn.com/index.php?showtopic=7401
You've got DMA errors.
To fix that you can try a number of things...
Replace the cable going to the drive (with as short a one as possible)
Update the motherboard / controller drivers.
Uninstall the controller within Device Manager and reboot so it finds it again (This is the DMA fix posted in the FAQ)
如果不能解决——
IMGBURN 失败后应该有个日志文件，发一下。建议同步发到 ImgBurn 官方论坛：
ImgBurn Support Forum -> ImgBurn Support
http://forum.imgburn.com/index.php?showforum=6
在那边发帖后，复制个链接在这里，便于跟踪。 谢谢！我马上试试 到设备管理器把光驱卸了，然后再装就OK 恭喜解决！
页:
[1]