求问 光盘刻录失败 附上错误报告！
本帖最后由 硬件毛虫 于 2012-12-6 21:01 编辑刻的时候没在 回来看 盘已出仓 显示 刻录失败 无法进行一次性结束光盘动作
拿出盘来看 底部多了一点莫名的划痕 再放入盘 discspeed显示空盘 NERO也是空的 可以往里添东西 这盘到底是刻了还是没刻啊 还能再用么？
错误报告如下
雨林木风
WwW.YlmF.NeT
1K22-1867-0795-66M4-5454-4950-****
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 8.3.20.0
Internal Version: 8, 3, 20, 0
(Nero Express)
Recorder: <ASUS DRW-24B3ST> Version: 1.00 - HA 1 TA 0 - 8.3.20.0
Adapter driver: <Serial ATA> HA 1
Drive buffer: 1536kB
Bus Type : via Inquiry data
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <ASUS DRW-24B3ST >Version: 1.00 - HA 1 TA 0 - 8.3.20.0
Adapter driver: <Serial ATA> HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : ASUS DRW-24B3ST atapi Port 0 ID 1DMA: On
DiskPeripheral : ST3808110AS atapi Port 5 ID 0DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 6 ID 0DMA: Off
=== CDRom-Device-Map ===
ASUS DRW-24B3ST G: CdRom0
Generic DVD-ROM H: CdRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2046MB (2095212kB)
Free physical memory: 1542MB (1579584kB)
Memory in use : 24 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
6.12.2012
ISO编辑
19:07:43 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
19:07:43 #2 Text 0 File Isodoc.cpp, Line 6714
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path: TRUE
Write ISO9660 ;1 file extensions : TRUE
19:07:44 #3 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 0 (0x00000000)
19:07:44 #4 Text 0 File Burncd.cpp, Line 3710
Turn on Disc-At-Once, using DVD media
19:07:44 #5 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator 'CUDFSettingsValidatorDVD'
ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical'
Changing UDF revision from '1.02' to '1.02'
19:07:45 #6 Text 0 File DlgWaitCD.cpp, Line 311
Last possible write address on media:2298495 (510:46.45, 4489MB)
Last address to be written: 2279375 (506:31.50, 4451MB)
19:07:45 #7 Text 0 File DlgWaitCD.cpp, Line 323
Write in overburning mode: NO (enabled: CD)
19:07:45 #8 Text 0 File DlgWaitCD.cpp, Line 2946
Recorder: ASUS DRW-24B3ST, Media type: DVD-R
Disc Manufacturer ID: <RITEKG> <05>
Disc Application Code: 64, Disc Physical Code: 193
19:07:45 #9 Text 0 File DlgWaitCD.cpp, Line 497
>>> Protocol of DlgWaitCD activities: <<<
=========================================
19:07:45 #10 Text 0 File ThreadedTransferInterface.cpp, Line 754
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2279376 (2279376) = #2279376/506:31.51
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2279376 blocks
--------------------------------------------------------------
19:07:45 #11 Text 0 File ThreadedTransferInterface.cpp, Line 956
Prepare for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4668162048, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 |lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 |2279376 | 0 | 0x00
2279376 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
19:07:45 #12 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
19:07:45 #13 Text 0 File Burncd.cpp, Line 4623
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
19:07:45 #14 Phase 24 File dlgbrnst.cpp, Line 1797
Caching of files started
19:07:45 #15 Text 0 File Burncd.cpp, Line 4745
Cache writing successful.
19:07:45 #16 Phase 25 File dlgbrnst.cpp, Line 1797
Caching of files completed
19:07:45 #17 Phase 36 File dlgbrnst.cpp, Line 1797
Burn process started at 6x (8,310 KB/s)
19:07:45 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2673
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
19:07:45 #19 Text 0 File DVDR.cpp, Line 3330
Recording mode: Sequential Recording Mode
19:07:45 #20 Text 0 File DVDR.cpp, Line 3484
Start write address at LBA 0
DVD high compatibility mode: Yes
19:07:45 #21 SPTI -1066 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Key:0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x0677b040: Len x648
19:07:45 #22 Text 0 File Cdrdrv.cpp, Line 10185
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP),Layer Type: recordable
Linear Density: 0,267 um/bit,Track Density:0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
Outer Limit of Data Recordable Area: 0 h
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: -
Revision number of minimum recording speed: -
Revision number table of recording speed: - - - - - - -
Class: 0,Extended part version: 0
Start PSN of the Extra Border Zone: 0 h
Start PSN of Physical format information blocks in Extra Border Zone: 0 h
Media Specific :
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
15 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
01 40 C1 FD 9E D8 52 00 - 02 B6 0E 11 98 9A 80 00 .@....R.........
03 52 49 54 45 4B 47 00 - 04 30 35 00 00 00 00 00 .RITEKG..05.....
05 88 80 00 00 00 02 00 - 06 08 12 11 98 9A 80 00 ................
07 88 80 00 00 00 00 00 - 08 03 17 0A 0B 09 02 00 ................
09 96 05 0C 0B 60 00 00 - 0A 00 00 00 00 00 10 00 .....`..........
0B 04 1D 17 B8 88 75 00 - 0C 89 AC 98 81 00 10 00 ......u.........
0D 00 00 D0 00 00 00 00 - 0E 09 24 37 2F 29 1E 00 ..........$7/)..
0F 50 17 27 19 89 B5 00 - 10 88 84 00 04 00 04 00 .P.'............
11 00 00 00 00 00 00 00 - 12 09 31 3B 33 2B 1D 00 ..........1;3+..
13 50 1D 2B 1F 97 B5 00 - 14 88 84 00 04 00 04 00 .P.+............
15 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
19:07:45 #23 Text 0 File DVDR.cpp, Line 3622
Reserved Track size: 2279376 (22C7D0h, 4451MB) -> return code 0
19:07:45 #24 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800
19:07:49 #25 SPTI -1196 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Key:0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02
Buffer x190b0040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
19:07:49 #26 CDR -1196 File Writer.cpp, Line 306
Disc not present - tray open
G: ASUS DRW-24B3ST
19:07:49 #27 SPTI -1169 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
CDB Data: 0x55 10 00 00 00 00 00 00 3C 00 00 00
Sense Key:0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 08
Buffer x02f6df80: Len x3c
0x00 00 00 00 00 00 00 00 05 32 02 C4 08 00 00 00
0x00 00 00 00 00 00 00 96 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
19:07:49 #28 Text 0 File DVDR.cpp, Line 3890
EndDAO: Last written address was -1 (FFFFFFFFh)
19:07:49 #29 CDR -1080 File WriterStatus.cpp, Line 287
Disc not present
G: ASUS DRW-24B3ST
19:07:49 #30 TRANSFER -24 File WriterStatus.cpp, Line 287
Could not perform end of Disc-at-once
19:07:49 #31 SPTI -1169 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
CDB Data: 0x55 10 00 00 00 00 00 00 3C 00 00 00
Sense Key:0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 08
Buffer x02f6df80: Len x3c
0x00 00 00 00 00 00 00 00 05 32 01 C4 08 00 00 00
0x00 00 00 00 00 00 00 96 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
19:07:49 #32 Phase 38 File dlgbrnst.cpp, Line 1797
Burn process failed at 6x (8,310 KB/s)
19:07:49 #33 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
19:07:49 #34 Text 0 File Cdrdrv.cpp, Line 11448
DriveLocker: UnLockVolume completed
19:07:53 #35 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
再放入光驱 用软件看
我接着又刻了一张同款盘 而且进行了数据校验 成功完成 点拨论坛搜索：052400
其他照此自行查询原因。 IsaacZ 发表于 2012-12-6 21:10 static/image/common/back.gif
点拨论坛搜索：052400
其他照此自行查询原因。
查了表 052400 Invalid field in CDB 貌似是盘片问题
页:
[1]